The 360 Camera OBD Programmer unlocks the stock 360 Camera on the 2019-2024 Sprinter and allows usage above the stock 10MPH stock limit. The programmer allows the camera to be used at speeds above 10 MPH OR without any 10 MPH auto cutoff for full control.
Note: this programmer is only compatible with vehicles equipped with the OEM 360 degree camera system (Full 360)
Advantages of the OBD Programmer:
Installs in minutes
Enables full control of 360 Camera
Three programming modes
How it works:
The tuner plugs into the OBD port of your vehicle. Depending on the mode you select, the module unlocks the OEM 360 camera feature, removing the 10MPH limit.
Mode 1: Enable camera button on OEM radio to activate the 360 camera above 10 MPH.
Mode 2: Enable camera button on OEM radio to activate the 360 camera at any time, completely removing the 10 MPH limiter. If the 360 camera is on it must be turned off manually by pressing the camera button. Example: If you shift to reverse then to drive, the 360 degree camera will be on automatically in drive. With this mode, the 360 camera will remain on until it is manually turned off.
Mode 3: Enable camera button on OEM radio to activate the 360 camera below 10 MPH (stock value).
Frequently Asked Questions:
Will The On Demand 360 Camera Programmer work on my Sprinter?
The OBD unlock module is only compatible with 2019-2024 Sprinters equipped with the OEM 360 camera system (Full 360).
Will the 360 Camera Programmer Void my Vehicle Warranty?
No. The module only targets specific memory locations which affect the 360 Camera system. If for some reason you remove the tuner, no one will ever know it was installed.
Does The On Demand 360 Camera Programmer have a Warranty?
Yes. The module is covered by a lifetime warranty against defect, malfunction, or failure.
Does The On Demand 360 Camera Programmer work on Multiple Vehicles?
The module locks to your specific vehicle once used, so you can reuse it to change modes at any time if desired.
Must the On Demand 360 Camera Programmer remain plugged into the OBD port?
No. The programmer must be removed from the OBD port once programming is complete. You cannot operate the vehicle with the programmer connected.
APPLICATIONS:
2019 Sprinter with OEM 360 Camera (Full 360)
2020 Sprinter with OEM 360 Camera (Full 360)
2021 Sprinter with OEM 360 Camera (Full 360)
2022 Sprinter with OEM 360 Camera (Full 360)
2023 Sprinter with OEM 360 Camera (Full 360)
2024 Sprinter with OEM 360 Camera (Full 360)
Select Winnebago Revels with OEM 360 Camera (Full 360)
Reviews
There are no reviews yet.